The 7th Pacific Rim Conference on Rheology June 10 (Sun) - 15 (Fri), 2018
Phoenix Jeju, Jeju, Korea
Keynote Speakers(General Sessions)

General Sessions

(in alphabetic order)

[G1. Materials Processing]

Kun Sup HYUN
Polymer Processing Institute, USA
*Title (Tentative): Clinical Analysis of Past Work to New Solid Conveying Theory
* Kun Sup HYUN
(Polymer Processing Institute, USA)

Dr. Kun Sup Hyun, President Emeritus of the Polymer Processing Institute (PPI) and a former Research Professor in the Otto H. York Department of Chemical, Biological, and Pharmaceutical Engineering at the New Jersey Institute of Technology (NJIT), Newark, New Jersey, was an Invited Honorable Professor at Hannam University in Daejeon Daeduk Techno Valley Campus in Advanced Materials and Processing Department. He is an advisor to Center for Nano-structured Polymer Processing Technology at Seoul National University
He has served as President of PPI from 2001-2007. Before joining PPI and NJIT, he spent nearly 35 years at The Dow Chemical Company as a Senior Research Scientist (Highest Technical position) and Global Technical Leader of Polymer Processing Technology. Dow Chemical honored him by establishing Dow Chemical Engineering Science Polymer Processing Kun Sup Hyun Award, which has been presented to Scientists and Engineers at Dow for several years. He was elected to a Fellow in the Society of Plastic Engineers (SPE) in 1996, and have received Best Paper Awards from the Extrusion Division in 1992, 1999, and 2000. Dr. Hyun received from the Extrusion Division of SPE, a Distinguished Service Award (2001), the Bruce H. Maddock Award in Single Screw Extrusion Technology (2002). Also received SPE International Award in Polymer Engineering and Technology (2007). He holds over 12 U.S. Patents, and have authored over 100 technical publications. He was the Series Editor of "Progress in Polymer Processing" Books in the Polymer Processing Society (1997-2004). He has served on Industrial Technical Advisory Board for Chemical Engineering Department of University of Missouri-Columbia (1998- 2001).
Myung-Ho KIM
Hannam University, Korea
*Title (Tentative): A Novel Rheometry: the Screw Rheometer
* Myung-Ho KIM
(Hannam University, Korea)

Dr. Myung Ho Kim is a professor in Department of Advanced Materials and Chemical Engineering at Hannam University in Daejeon, Korea, and a CEO of a venture company MKE (Myung Kim Extrusion), which provides global companies with polymer processing solutions. He has broad experiences in both academic and industrial arena. His main research areas are extrusion process design including single screw, dies and foam, extrusion compounding, applied rheology, blow molding, injection molding and thermoplastic materials and foams. He invented the first designer pellet 'Hyperier®' in his LG Chem. Days. His work for the new pellet is called the most astonishing technology in MMT nanocomposites. He took 'multiple lamellar-layered technology' using one single screw extruder and die, and invented and registered over 160 international patents. He received his B.S. and M.S. in Chemical Engineering from Seoul National University, Korea, and Ph.D. in Polymer Processing from Stevens Institute of Technology, He was an invited speaker of Gordon Research Conferences: CAE in Polymer Processing in 1999 as a Ph.D. candidate. He is now serving as a board member of Applied Rheology Division and a delegate of Korea in SPE, a convener of TC61/SC10/WG10 of ISO and a registered board member of Korean Society of Rheology.
(Hyperier® is a registered trademark of LG Chem., Ltd)
Jaewook NAM
Seoul National University, Korea
*Title (Tentative): Analysis of Thin-film Formation Flows for Coating Processes
* Jaewook NAM
(Seoul National University, Korea)

Dr. Jaewook Nam received his B.S. and M.S. in Chemical Engineering from Seoul National University, Korea, and Ph.D. in Chemical Engineering from University of Minnesota. He worked as a research associate at Rice University for two years and a professor at Sungkyunkwan University for six years. He is currently working at School of Chemical and Biological Engineering, Seoul National University. His professional experience also includes three years as a consulting engineer.
Dr. Nam has published about 60 technical papers in the area of materials processing, nanotechnology, and numerical analysis. His research focused on the analysis of continuous coating process, which creates thin uniform film including nano and micro-sized materials. His work on continuous liquid coating process has received wide attention including many electronics industries, including Samsung and LG. He is also working as a short course lecturer for the coating process basics designed for continuing education of engineers.
Yeong-Eun YOO
Korea Institute of Machinery and Materials, Korea
*Title (Tentative): A Study on Sealing Micro-Fluidic Channels by Ultra-Sonic Welding
* Yeong-Eun YOO
(Korea Institute of Machinery and Materials, Korea)

Dr. Yeong-Eun Yoo is a principal researcher of the Korea Institute of Machinery and Materials (KIMM) where he joined in 2003. He is currently head of Department of Nanomanufacturing Technology of KIMM. He is also a professor at Department of Nano Mechatronics in University of Science and Technology. He worked at LG Chem. in Korea from 2000 to 2003 and at the UIUC, in U.S.A. as a post-doc. from 1997 to 2000 after completing his degrees in mechanical engineering at the Seoul National University in Korea : S.B. in 1990, S.M. in 1992, and Ph.D. in 1997. Recent his main research includes injection molding and packaging of mass producible plastic nano/micro fluidic platform for biochips or POCT (Point-of-Care Test) devices, injection molding of plastic optical/mechanical elements with nano/micro surface structures, design and fabrication of biomimetic membrane based on functionalized nanopores for filtering of molecules or ions selectively.

[G2. Non-Newtonian Fluid Mechanics & Microfluidics]

University of British Columbia, Canada
*Title (Tentative): A New Method for Stable Core Annular Flow of Heavy Oils
(University of British Columbia, Canada)

Ian Frigaard is Professor of Mechanical Engineering and Applied Mathematics at the University of British Columbia. He holds B.Sc. From Cardiff University, M.Sc. and D.Phil. degrees from Oxford University. He joined UBC in 2000 after 3 years with Alcan International, a postdoc period at University of Linz and 6 years with Schlumberger. His research work has two main foci: the fluid mechanics of yield stress fluids and the modelling of non-Newtonian fluid flows stemming from the oil & gas industry. His interests span experimental, computational and analytical methods. Problems of classical nature (bubbles, particles, hydrodynamic stability,...) and very applied problems (cementing of oil & gas wells, pipelining, etc) have equal interest. He is Editor-in-Chief of the Journal of Non-Newtonian Fluid Mechanics and serves on the Editorial boards of Rheologica Acta, Meccanica and Journal of Engineering Mathematics.
Wook Ryol HWANG
Gyeongsang National University, Korea
*Title (Tentative): A General Approach on the Quantification of Effective Quantities in a Pressure-driven Flow of Inelastic Non-Newtonian Fluid in Arbitrary Geometries based on the Energy Balance
* Wook Ryol HWANG
(Gyeongsang National University, Korea)

Professor Wook Ryol Hwang, Gyeongsang National University, Jinju, South Korea. He received his B.S., M.S. and Ph.D in mechanical engineering from Pohang University of Science and Technology (2001 for PhD). His field of expertise are Computational Rheology/Polymer Processing and Technology and Mixing in Process Technologies. He has recently done several interesting studies on non-Newtonian flow and particulate flows including flows and filtration in porous media, particle suspensions with viscoelastic fluids and thermal fluctuation, drilling processes, agitator designs, etc.
Eric Stefan G. SHAQFEH
Stanford University, USA
*Title (Tentative): The Sedimentation of Particle Suspensions in Viscoelastic Fluids with and without Applied Shear
* Eric Stefan G. SHAQFEH
(Stanford University, USA)

Eric Shaqfeh is the Lester Levi Carter Professor and Chair of Chemical Engineering at Stanford University. He is also a Professor of Mechanical Engineering, and most recently (as of 2004) a faculty member in the Institute of Computational and Mathematical Engineering at Stanford.
Shaqfeh's current research interests include non-Newtonian fluid mechanics (especially in the area of elastic instabilities, and turbulent drag reduction), nonequilibrium polymer statistical dynamics (focusing on single molecules studies of DNA), and suspension mechanics (particularly particles in viscoelastic fluids and particles/vesicles/capsules in microfluidics). He has authored or co-authored over 180 publications and now serves as an Associate Editor of the Physical Review Fluids. He also serves on the boards of four other international journals.
Shaqfeh has received a number of awards including the 2011 Bingham Medal from the Society of Rheology. He is a Fellow of the American Physical Society (2001) and the Society of Rheology(2015), as well as a member of the National Academy of Engineering (2013).

[G3. Polymer Solutions & Melts]

Penn State University, USA
*Title (Tentative): Shear-Induced Conformational Changes of Flexible and Semi-Rigid Engineering Thermoplastics and their influence on Crystallization
* Ralph COLBY
(Penn State University, USA)

Ralph H. Colby received his B.S. in Materials Science and Engineering from Cornell University in 1979 and received his M.S. and Ph.D. in Chemical Engineering in 1983 and 1985 from Northwestern University. He then worked for ten years at the Eastman Kodak Company in their Corporate Research Laboratories. In 1995, Dr. Colby joined the faculty in Materials Science and Engineering at the Pennsylvania State University where he teaches an undergraduate course on Polymer Rheology and Processing, a graduate course on Polymer Physics and continues to use rheological experiments to probe the dynamics of polymers and other complex fluids. Dr. Colby has over 200 publications and published a textbook Polymer Physics in 2003. He was the 2012 recipient of the Society of Rheology's Bingham Medal and is currently the Editor of the Journal of Rheology.
Yamagata University, Japan
*Title (Tentative): Stress and Dielectric Relaxation under Fast Shear Flow -- a Simulation Study
* Jun-ichi TAKIMOTO
(Yamagata University, Japan)

Prof. Jun-ichi TAKIMOTO has received B.S, M.S and Ph.D in Physics from University of Tokyo (Ph.D 1985). After working in Institute of Molecular Science, Nissan Motor Company, Yamagata University, and Nagoya University, he has been a Professor in Yamagata University since 2002. His research field is theoretical and simulation study of soft matter physics, rheology and polymer processing, and have about 100 publications. He received the Society Award in 2012 from the Society of Rheology, Japan, and now a vice president of the Society.
Xiaorong WANG
Tongji University, China
*Title (Tentative): Particle-Filled Polymer Melts Manifesting Linear-Nonlinear Dichotomy Rheology
* Xiaorong WANG
(Tongji University, China)

Dr. Xiaorong Wang earned his Ph.D. in the Chemical Engineering and Material Science in 1994 from Syracuse University and worked as a Research Associate at Princeton University. He joined Bridgestone/Firestone Research in 1995, and became a Senior Scientist of Key Management Band in the company and served as the Project & Group Leaders for a number of research groups. Dr. Wang has over 100 invention patents. Many of his inventions are now in commercial use, ranging from electronics to automobile tires. For that, he has been the recipient of a number of awards, among which was the Bridgestone/Firestone CEO Award. Dr. Wang in 2013 joined Tongji University as a Distinguished Professor. His research interests include: anionic polymerization, molecular rheology, complex fluids, reinforcement, jamming, micro-phase engineering, damping, rolling resistance and traction.
Karlsruhe Institute of Technology (KIT), Germany
*Title (Tentative): A novel low-field RheoNMR combination for the study of soft materials
* Manfred WILHELM
(Karlsruhe Institute of Technology (KIT), Germany)

-1986-1992 Study of Chemistry at the University of Mainz and University of Toronto
-Ph.D 07/1995 on Solid state NMR on polymers, Prod. Spiess, Max Planck Institute, Mainz (Germany) and UCSB, Santa Barbara (USA)
-Postdoc 1995- 1997 at the Weizmann-Institute
-1997 to 2003 at the Max-Planck-Institute for Polymer Research in Mainz, habilitation on FT-Rheology
-2004-2006 Professorship at Technical University Darmstadt "Mechanics of Polymers" in the engineering mechanics department.
From 10/2006 Professorship "Polymeric Materials" at University of Karlsruhe, now KIT, Karlsruhe (Germany)
2015: call to a Professorship in Bayreuth, Germany, denied
2016: call to a Professorship in Dresden (IPF), Germany, denied

[G4. Computational Rheology]

Kwang Soo CHO
Kyungpook National University, Korea
*Title (Tentative): Non-Equilibrium Statistical Mechanical Theory of Continuum Mechanics Comparable with Dissipative Particle Dynamics
* Kwang Soo CHO
(Kyungpook National University, Korea)

Kwang Soo Cho received his B.S and M.S. in Textile Engineering from Seoul National University in 1989 and 1991, respectively and his Ph. D. in Material Science and Engineering from Seoul National University in 2000. He developed flame retardant plastics at Cheil Industries, a company of Samsung group for 6 years in early 90's. His research covers theory of viscoelastic constitutive equations and viscoelastic identification from experimental data. He and his coworkers developed various numerical and theoretical methods for viscoelasticity: stress decomposition and strain-frequency superposition for LAOS; time-temperature superposition by geometric analysis; conversion between data of linear viscoelastic functions; determination of relaxation time spectrum. He wrote a monograph entitled by Viscoelasticity of Polymers in 2016.
Xue-Feng YUAN
Guangzhou University, China
*Title (Tentative): Non-linear Dynamics of Macromolecular Solutions in Microfluidics
* Xue-Feng YUAN
(Guangzhou University, China)

Professor Xue-Feng YUAN is a Chartered Physicist, a Fellow of the Institute of Physics and a Fellow of Royal Society Chemistry. He has joined Guangzhou University as Professor in Systems Rheology to establish Advanced Institute of Engineering Science for Intelligent Manufacturing since November 2016 after three years service as the Founding Director of National Supercomputer Centre in Guangzhou for running "Tianhe-2" supercomputer which was ranked as the world fastest supercomputer six times successively from June 2013 to June 2016. He is a chief co-ordinator of ICT&HPC thematic area for the BRICS STI Framework Programme in China and a member of the Global Initiative Working Group of the European Commission eInfraCentral Coordination Action. He serves as a Council Member of Chinese Society of Rheology. Prof Yuan has more than 30 years research experience in experimental, theoretical and computational rheology of soft condensed matter, and its applications in biology and medicine. He obtained PhD from the Victoria University of Manchester, UK in 1989. He then worked as a postdoctoral research associate at Theory of Condensed Matter Centre, Cavendish Laboratory, the University of Cambridge, UK for five years, and also worked as a Kao Corporation visiting scientist and as a part-time lecturer in Department of Applied Physics, Nagoya University, Japan. He won a prestigious 5-year EPSRC (UK) Advanced Research Fellowship in 1996 and worked in Centre of Theoretical Physics, Department of Physics, the University of Bristol, UK till Sept. 1999, then joined Department of Mechanical Engineering, King's College London, UK. He took a Readership in Biochemical Physics at Manchester Interdisciplinary Biocentre, School of Chemical Engineering and Analytical Science, the University of Manchester, UK, in 2004. He was elected and served as a council member of the British Society of Rheology and the Honorary Editor for BSR Bulletin from 2006 to 2012. He served various EPSRC Prioritisation Panels for Processing Engineering, Structural Materials, Physics, Fighting against Crime Programme, and MRC Prioritisation Panel for Discipline Hopping Grants. He was an external PhD thesis examiner for the University of Cambridge, Warwick University, University of Sheffield, Cardiff University and Swansea University.

[G5. Gels and Rubbers]

Kyoto Institute of Technology, Japan
*Title (Tentative): Nonlinear Elasticity and Internal Fracture of Double Network Hydrogels Characterized by Multiaxial Stretching
(Kyoto Institute of Technology, Japan)

Kenji Urayama is a professor in Department of Macromolecular Science and Engineering at Kyoto Institute of Technology in Japan. He was a faculty member at Department of Materials Chemistry at Kyoto University until 2013. His current research focuses on the nonlinear viscoelasticity of soft solids such as elastomers and gels, especially characterized by a custom built biaxial tester, and the rheology of dense microgel suspensions, and the stimulus-response behavior of liquid crystal elastomers and gels. His honor includes the Young Investigator Award in 2005 from the Society of Rheology, Japan, the John H. Dillon Medal in 2006 from the Division of Polymer Physics in American Physical Society, and Bridgestone Soft Materials Frontier Award in 2012 from the Society of Rubber Industry, Japan.
Zi Liang WU
Zhejiang University, China
*Title (Tentative): Processing of Tough Supramolecular Hydrogels
* Zi Liang WU
(Zhejiang University, China)

2006.10-2010.3 Hokkaido University, PhD in Life Science
2003.9-2006.3 East China University of Science and Technology, Master in Chemical Engineering
1999.9-2003.7 Zhejiang University, Bachelor in Polymer Chemical Engineering

2015.1-present Associate professor, Department of polymer science and engineering, Zhejiang University
2013.10-2014.12 Assistant professor, Department of polymer science and engineering, Zhejiang University
2011.10-2013.5 Postdoc researcher, Institute Curie
2010.6-2011.8 Postdoc researcher, Department of chemistry, University of Toronto
Research field: polymer hydrogels, elastomers, soft actuators
Kyushu University, Japan
*Title (Tentative): Mechanics of Network Structures
(Kyushu University, Japan)

After working for industries,
2007: ph. D, Department of Applied Physics, The University of Tokyo
2007: Post-doc, ESPCI Paris Tech.
2007: Assistant Professor, Department of Applied Physics, The University of Tokyo
2011: Project Associate Professor, Bio-mechanics Research Center, Kyushu University
2012 - Present: Associate Professor, Kyushu University
2013-2014: Earthquake Research Institute, The University of Tokyo
2015: Invited Professor, EPFL (Switzerland)
2016: Invited Professor, University of Claude Bernard Lyon 1 (France)
Research Field: Soft matter physics, adhesion, fracture, friction, earthquake physics

[G6. Suspensions, Colloids, and Glasses]

Yoshiyuki KOMODA
Kobe University, Japan
*Title (Tentative): Shear Thickening of Condensed Suspension Induced by Nano-particles
* Yoshiyuki KOMODA
(Kobe University, Japan)

Yoshiyuki Komoda received his degree (Dr. Eng.) in Chemical Engineering from Osaka University in Japan. After working at industry for four years, he started academic carrier in Kobe University in Japan. He is currently an associate professor at Department of Chemical Science and Engineering, Kobe University. His research field covers fluid mixing, rheological characterization of suspension, and coating and drying processes of coated suspension.
Case Western Reserve University, USA
*Title (Tentative): Wall-bounded Flow of Colloidal Suspensions
* Joao MAIA
(Case Western Reserve University, USA)

Professor Joao Maia graduated in Technological Physics Engineering from the Technical University of Lisbon in 1992 and obtained his PhD Degree in Rheology from the University of Wales Aberystwyth in 1996. Between 1996 and September 2009 he was faculty at the University of Minho, Portugal and since October 2009 he's been with the Department of Macromolecular Science and Engineering of Case Western Reserve University.
He was a Fulbright Fellow in 2007 and received the 2010 Annual Award of the British Society of Rheology and the 2011 Morand Lambla Award of the Polymer Processing Society. He was the organizer of the XVIth International Congress on Rheology held in Lisbon, Portugal in August 2012. He has authored or co-authored more than 150 papers, book chapters and patents and more than 300 conference presentations. His main research interests lie in the areas of extensional rheology and rheology applied to polymer processing, with an emphasis on the development of new functional multiphase polymeric materials, e.g. blends and composites, both from the experimental and (multiscale) computational standpoints. He is currently the Director of CAPP - Center for Advanced Polymer Processing, of CWRU.
The University of Queensland, Australia
*Title (Tentative): Liquid to Solid Transition in Soft Material Suspensions
* Jason STOKES
(The University of Queensland, Australia)

Jason Stokes is Professor and currently Director of Research in the School of Chemical Engineering at The University of Queensland (UQ), Australia. He has over 100 publications that includes research concerning the rheology and tribology of complex fluids and soft matter systems incorporating nanocellulose, microgels, biopolymers, colloids, biofluids, plant cell walls and cellulose hydrogels. In partnership with industry, he and his team have also pioneered new measurement techniques and approaches to study the physics of food oral processing to enable rational food-structure design. He was recipient of the 2013 British Society of Rheology Annual Award and is currently Vice President of the Australian Society of Rheology. His Rheology, Tribology and Biointerfaces laboratory currently supports ca. 20 researchers through funding from the Australian Research Council and companies based nationally and internationally.
Kyoto University, Japan
*Title (Tentative): Confinement Effect on Synchronized Motions of Driven Colloids on a Path
(Kyoto University, Japan)

In 1994, He received Ph. D. (1994) degrees from Kyushu University, Japan, and then
1995-1997: JSPS research fellow for Young Scientists (PD) at Kyoto University,
1997-2002: Assistant professor in Nagoya University (Prof. Doi group),
2002-2009: Associate Professor in Yamagata University.
He was also a visiting researcher (2003) at Material Research Laboratory in the University of California, Santa Barbara. (c/o Prof. Glenn Fredrickson)
Since 2009 he has been an associate professor in Kyoto University.
His research interests are studies on soft matter physics, in particular, physics of colloids, polymeric systems and lipid membranes using theories and simulations.

[G7. Surfactants, Emulsions, and Foams]

Jin Woong KIM
Hanyang University, Korea
*Title (Tentative): Colloid Surfactant Catalysts for Pickering Emulsion Microreactors
* Jin Woong KIM
(Hanyang University, Korea)

Prof. Jin Woong Kim got his bachelor degree in 1994, master degree in 1996, and Ph. D in 2000 from Industrial Chemistry at Hanyang University. Then he had an industry experience as a chief researcher at Amore-Pacific R&D Center for 10.5 years. During that time, he also spent 2.5 year as a post-doc at Physics of Harvard University. From 2011, he started his academy life at Chemical and Molecular Engineering of Hanyang University. His research interests lie in fabricating a wide variety of soft materials, of which length scales are adjustable over nanometers to micrometers, and particularly how their morphological, structural, and mechanical properties should be designed and controlled in complex fluids. He has a wide research experience in both fabricating functional soft materials and modifying their chemical and physical properties, which are essential for developing novel complex systems. His research can be specified as follows; molecular or colloidal self-assemblies, colloid or emulsion interactions, microfluidics, nano- and micro-encapsulations, liposomes, polymersomes, and transdermal deliveries.
Won Bo LEE
Seoul National Univeristy, Korea
*Title (Tentative): Self-Assembly and Properties of Block Copolymers: Molecular Dynamic Simulations
* Won Bo LEE
(Seoul National Univeristy, Korea)

Won Bo Lee is the associate professor of School of Chemical and Biological Engineering at Seoul National University (SNU). He received his BS (1996) and MS (1998) in department of Chemical Engineering from SNU. He received his PhD (2007) in department of chemical engineering at University of California, Santa Barbara (UCSB). He has worked as a postdoctoral fellow (Humboldt fellow) in Max Planck Institute for Polymer Reserach (MPIP) and he has also worked as the assistant/associate professor in Sogang University (2010-2015). He finally joined the faculty of SNU in 2015. Statistical mechanics is used as a tool to understand how molecular parameters translate into equilibrium and non-equilibrium thermodynamic behavior of various soft matter systems. Currently, his research expertise includes applications of computer vision algorithms to results from atomistic molecular dynamics or Monte Carlo simulations of sub- and supercritical fluids (carbon dioxide and water).
Florence ROUYER
Université Paris-Est, France
*Title (Tentative): Gas Marbles: Strength and Gas Permeability
* Florence ROUYER
(Université Paris-Est, France)

Florence Rouyer is Associate Professor of Physics at the Université Paris-Est Marne-la-Vallée since 2002. She received her PhD in 1999 from the Université Paris-Sud. She studied solids/liquids suspension from 1996 to 1999 in Fast Laboratory in Orsay during her PhD thesis and granular gases in 2000 at UMASS in Amherst during hers post-doc.
Since 2000, her research interest concerns more generally the physics of soft matter with liquid interfaces: stability of foams and bubbles, stability and rheology of particulate soap films, gas marbles, foamability of complex fluids.
Okinawa Institute of Science and Technology Graduate University, Japan
*Title (Tentative): Microstructure, Rheology, and Flow Instability of Wormlike Micellar Solutions under Spatial Confinement and Flow Conditions
* Amy SHEN
(Okinawa Institute of Science and Technology Graduate University, Japan)

Amy Shen is a professor in Micro/Bio/Nanofluidics Unit at Okinawa Institute of Science and Technology Graduate University in Japan. She was a faculty member at Mechanical Engineering and Chemical Engineering at University of Washington until July 2014. Amy's research is focused on microfluidics, rheology, and self assembly that can find applications in the nanotechnology and biotechnology. Amy is an honor member of Phi Kappa Phi and Pi Tau Sigma. Amy received Ralph E. Powe Junior Faculty Enhancement Award in 2003 and the National Science Foundation's CAREER Award in 2007. Amy is also a Fulbright Scholar in 2013. Amy is an associate editor for Micormachines, Biomedical Microdevices, and Scientific Reports, and on the editorial advisory board for Physics of Fluids.

[G8. Interface & Microrheology]

RMIT University, Australia
*Title (Tentative): Challenges in Nanofluidics - beyond Navier-Stokes at the Molecular Scale
* Peter DAIVIS
(RMIT University, Australia)

Peter Daivis is professor of physics in the School of Science at RMIT University, Melbourne Australia. His work focuses on the application of non-equilibrium molecular dynamics simulation methods to problems in molecular rheology, including fundamental studies of slip, the effect of angular and translational momentum coupling and flow in strongly inhomogeneous fluids.

[G9. Experimental Techniques]

Kyushu University, Japan
*Title (Tentative): Viscoelastic Property of Polymer Materials Based on Dynamic X-ray Scattering/Diffraction Methods
(Kyushu University, Japan)

Ken Kojio is currently an associate professor of Takahara Laboratory, the Institute for Materials Chemistry and Engineering (IMCE), Kyushu University. He received his degree (Dr. Eng.) in 1999 from Materials Physics and Chemistry, Kyushu University. He was a post-doc researcher in Materials Science & Engineering at University of Illinois, Urbaba-Champain (2000-2001) and in Polymer Science & Engineering at the University of Massachusetts, Amherst (2001-2002). He worked as an assistant and associate professor at Nagasaki University (2002-2014). His research interests include molecular aggregation structure and molecular mobility of amorphous and crystalline polymers.

[G10. Bio & Food Rheology]

Lund University, Sweden
*Title (Tentative): Role of Protein-Protein Interactions in Non-Linear Rheometry of Dense Solutions of Monoclonal Antibodies
* Alfredo LANZARO
(Lund University, Sweden)

Alfredo Lanzaro is currently an Assistant Professor at the Institute of Systems Rheology at Guangzhou University, Guangzhou, PR China. He received a Master Degree in Chemical Engineering at the Federico II University of Napoli, Italy, in 2005, followed by a Ph.D. in Prof. Xue-Feng Yuan’s research group at the University of Manchester, UK, in 2011. His doctoral work at UoM focused on studying and understanding the highly non-linear flow effects observed when semi-dilute polymer solutions flow through micro-fabricated channels. From 2012 to 2016, he was a Post-Doctoral Research Associate at the University of Manchester, where he investigated the non-linear rheometric behaviour of highly interacting biopharmaceutical solutions by means of the “Rheo-Chip” technology developed during his Ph.D., under the supervision of Dr. Robin Curtis. From 2016 to 2018, he was a Post-Doctoral Fellow in Prof. Peter Schurtenberger’s research group at Lund University, Lund, Sweden, where he developed a microfluidic-based “phase chip” technology which allows for quick screening of the phase behaviour of dense colloidal suspensions.
Sehyun SHIN
Korea University, Korea
*Title (Tentative): DNA Hydrogel based Microfluidic Device for Rapid Multiplexed Detection of Infectious Viruses
* Sehyun SHIN
(Korea University, Korea)

Sehyun Shin is the professor of School of Mechanical Engineering at Korea University. He received his B.Sc. and M.S. in Mechanical Engineering from Seoul National University, and his PhD in Mechanical engineering and Mechanics from Drexel University in 1993. He is currently the president of International Society of Clinical Hemorheology (ISCH) and the editor of Journal of Mechanical Science and Technology. He is also Director of nano-Biofluignostic Engineering Research Center funded by NRF.His research efforts include microfluidics, non-Newtonian fluids, hemorheology, platelets, surface plasmon resonance, and liquid biopsy for cancers and infections viruses.

[G11. General Rheology]

Victoria University of Wellington, New Zealand
*Title (Tentative): Influence of Shear Geometry Design on Shear Banding as Studied with Rheo-NMR
(Victoria University of Wellington, New Zealand)

Petrik Galvosas received a Dipl.-Ing. (FH) degree from the University of applied Sciences of the German Telekom in 1993 which was followed by a Dipl.-Phys. (physics diploma degree) of the University of Leipzig in 1998. The two theses were dealing with audio recording equipment and NMR diffusometry respectively. In 2003 he received his PhD from the University of Leipzig. The thesis revolved around the diffusion in porous materials and high performance NMR diffusometry. From 2003 to 2005 he was a postdoctoral fellow in the MacDiarmid Institute. From 2005 to 2009 he held a position as Juniorprofessor at the University of Leipzig. Since 2009 he is working in the School of Chemical and Physical Sciences (Victoria University of Wellington) and is an Associate Investigator with the MacDiarmid Institute for Advanced Materials and Nanotechnology.
Nagoya Institute of Technology, Japan
*Title (Tentative): Anisotropy of Photo-elastic Coefficient in Oriented Polycarbonate Film
(Nagoya Institute of Technology, Japan)

Shogo NOBUKAWA is an assistant professor in Nagoya Institute of Technology (NITech) in Japan. He received his B.S (2006), M.S. (2008) and Ph.D. (2011) from Department of Macromolecular Science, Osaka University (T. Inoue's group). He worked as an assistant professor in School of Materials Science, Japan Advanced Institute of Science and Technology (2011-2015). He joined NITech in 2015.
His research interests are molecular dynamics and mechanical properties of optical polymers, which are investigated by using rheological, dielectric relaxation and birefringence measurements.
Wei YU
Shanghai Jiao Tong University, China
*Title (Tentative): Stress Bifurcation and Viscoelastic Wall Slip Behavior of Yield Stress Fluids under Large Amplitude Oscillatory Shear
* Wei YU
(Shanghai Jiao Tong University, China)

In 2001, Ph. D. degrees from Shanghai Jiao Tong University, China
2001-2002: Post-doc at Laval University, Canada
2003-2009: Associate professor in Shanghai Jiao Tong University,
2009-present: Professor in Shanghai Jiao Tong University.
Research interests: rheology of polymer blends/composites, phase transition.

[PRCR 2018 Secretariat / Email : / Tel : 82-2-716-5553]
[상호] 한국유변학회 / 대표자:남재도 사업자등록번호 : 220-82-01332 135-703 서울시 강남구 테헤란로7길 22 한국과학기술회관 신관 806호
TEL : (02)3452-5117, 5118 / FAX : (02)3452-5119 / E-mail :

The Korean Society of Rheology (Tax no.: 220-82-01332)
No. 806, 135-703 (635-4, Yeoksam-Dong) 22, 7 Gil, Teheran-ro, Gangnam-Gu 135-703 Seoul, Korea

Copyright © PRCR2018. All Rights Reserved. TOP